Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cooling Radiator from a Chevrolet Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Radiator

See other generations:
Video tutorial

In this video, learn how to remove the cooling radiator from a Chevrolet Spark. Open the bonnet, detach the engine soundproofing panel, then use a suitable socket wrench to remove the plates that secure the radiator at the top. If necessary, remove the front panel.

Lift the car on a column lift and loosen the clamp on the water hose. Disconnect the various hoses from the cooling system.

Once free from screws and pipes, you can extract the fan assembly and then the radiator from the engine bay. Prepare to fit the new part in the engine bay: install the cooling fans, clamps, pins, and various hoses.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Chevrolet Spark
How to Remove the Radio from a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Do you want to remove the radio from your Chevrolet Spark but don't know how? Follow this guide to remove the original stereo. Remove the stereo trim…
Removing the Rear Door Panel on a Chevrolet Spark
Removing the Rear Door Panel on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) In this video tutorial, you will learn how to remove the rear door panel of a Chevrolet Spark. First, open the rear door and unscrew the fastening sc…
Guide to Replacing the Timing Belt on a Chevrolet Spark
Guide to Replacing the Timing Belt on a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) This guide provides instructions to dismantle and replace the timing belt on a Chevrolet Spark. First, open the engine bonnet and start by removing t…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos