Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Chevrolet Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

Do you want to remove the radio from your Chevrolet Spark but don't know how? Follow this guide to remove the original stereo. Remove the stereo trim frame using a plastic lever (where the air vents are located) and detach it from the centre console.

Once the stereo is free from constraints: unscrew the securing screws located on either side using a screwdriver. Pull out the stereo with your hands and disconnect the cables (power and antenna).

To reinstall, reverse the disassembly steps.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

Replacing Radio in Chevrolet Spark Dashboard
Replacing Radio in Chevrolet Spark Dashboard
Chevrolet Spark (2009-2018 / ) Replacing the radio in a Spark? This operation is not too difficult; let's see how to do it. Pry around the cover frame of the radio. Detach the ster…
Guide to Replacing the Timing Belt on a Chevrolet Spark
Guide to Replacing the Timing Belt on a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) This guide provides instructions to dismantle and replace the timing belt on a Chevrolet Spark. First, open the engine bonnet and start by removing t…
How to remove the radio from the Chevrolet Spark
How to remove the radio from the Chevrolet Spark
Chevrolet Spark (2016-2022 / M400) In today's article, we will show you how to disassemble the Chevrolet Spark car radio. This procedure is useful in case of radio malfunctions. The to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos