Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Radio in Chevrolet Spark Dashboard

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

Replacing the radio in a Spark? This operation is not too difficult; let's see how to do it. Pry around the cover frame of the radio. Detach the stereo's trim with a plastic lever (where the air vents are located).

Unscrew the securing screws on the sides of the radio using a screwdriver. Pull the stereo out with your hands and disconnect the cables (power and antenna).

To assemble, reverse the disassembly steps. First, connect the electrical terminals, then insert the radio into the dashboard and tighten the screws.

Secure the plastic cover.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

Replacement of the spark plugs of the Chevrolet Spark 1.2 16V.
Chevrolet Spark (2009-2016 / MK 1, M300) This short guide will illustrate the main instructions useful for disassembling and replacing the spark plugs of the Chevrolet Spark 1.2 16V engine. …
How to Remove the Radio from a Chevrolet Spark
How to Remove the Radio from a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Do you want to remove the radio from your Chevrolet Spark but don't know how? Follow this guide to remove the original stereo. Remove the stereo trim…
How do you replace the spark plugs on a Chevrolet Spark?
How do you replace the spark plugs on a Chevrolet Spark?
Chevrolet Spark (2009-2016 / MK 1, M300) Replacing the spark plugs on your Chevrolet Spark is a simple job that you can do in a few steps. First of all, turn off the engine and let it cool d…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos