Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on Chevrolet Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Antenna

See other generations:
Video tutorial

Music is often synonymous with car journeys, enhancing the mood of those inside the vehicle. For the driver, it allows for a more serene and relaxed driving experience.

For the radio to function, it needs an antenna, so whether you want to replace it with a tuning replacement or for light maintenance, you are in the right place. Purchase the replacement part either online or from a retailer.

Start by removing the interior light and disconnecting the connector. Unscrew the 10mm nut and free the antenna cable.

Pull the replacement part from the outside, clean off the old sealant, and replace it with the new one. Fit the new replacement into its place. Then, from inside the vehicle, tighten the nut and the antenna cable.

Reinsert the light after connecting the cable.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Chevrolet Spark
How to Remove the Radio from a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Do you want to remove the radio from your Chevrolet Spark but don't know how? Follow this guide to remove the original stereo. Remove the stereo trim…
How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) In this tutorial, you will see the steps to remove and replace the ignition coil connected to the spark plugs, which allows the current to pass for t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos