Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Brake Discs on Chevrolet Kalos

Model: Chevrolet Chevrolet Various
Part: Brake rotors

Video tutorial

Unscrew the wheel fastening bolts of the affected wheel, lift the car with a jack (if you do not have a ramp), and remove the wheel. Next, unscrew the two 14 mm bolts located behind the brake disc that secure it to the black support (which holds it to the suspension).

After unscrewing the two 14 mm bolts (the upper and the lower), unscrew the other two bolts nearby, which are 19 mm. After pushing the cylinder inward through the designated gap, you can remove the caliper and replace the brake pads. At this point, unscrew the last two 19 mm bolts to remove the disc.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Where is the fuse box located on a Chevrolet Kalos?
Where is the fuse box located on a Chevrolet Kalos?
Chevrolet Chevrolet Various Fuses are electronic devices that protect the electrical system of your Chevrolet Kalos from sudden power surges or short circuits by interrupting th…
How to Replace the Rear Wiper Blade on a Chevrolet Sonic?
How to Replace the Rear Wiper Blade on a Chevrolet Sonic?
Chevrolet Chevrolet Various To replace the rear wiper blade on a Chevrolet Sonic, grasp the blade and press the two tabs located at the junction between the wiper arm and the bl…
How to Replace the Key Battery on a Chevrolet Uplander
How to Replace the Key Battery on a Chevrolet Uplander
Chevrolet Chevrolet Various Thanks to the rather minimal design of your Chevrolet Uplander key (2005-2008), replacing the battery inside is particularly simple and quick. Below,…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos