Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on Chevrolet Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

The code for the brake pads to purchase is NAD1864. Loosen the bolts securing the affected wheel, then lift the car with a jack and completely unscrew them, allowing you to remove the wheel. Once done, observe the area behind the brake calipers and locate the two bolts, upper and lower, that secure it: these are 14 mm bolts.

After unscrewing these, use a large flat screwdriver to pry in the central space of the brake pistons, as shown in the video. Remove the caliper and replace the pads, then proceed in reverse order until fully reassembling, starting from the caliper and ending with the wheel installation.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
Replacement of the front headlight bulb of the Chevrolet Spark
Replacement of the front headlight bulb of the Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Today, we will discover how to disassemble and replace the headlight bulb of the Chevrolet Spark. First, open the hood of the car and start removing …
Replacing the Clutch Cable on the Chevrolet Spark
Replacing the Clutch Cable on the Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Follow the steps below to remove and replace the clutch cable on the Chevrolet Spark. First, open the bonnet of the vehicle and begin by removing the…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos