Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Equinox
    4. : How to replace the air filter on Chevrolet Equinox

Chevrolet Equinox - Video tutorial

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Air filter
Operation: How to replace the air filter on Chevrolet Equinox

Replacing the engine air filter is one of the simplest and most important operations to perform if you want to preserve the health of the engine itself, reducing the risk of abnormal overheating and much more. To do this, lift the front hood and locate the air filter box. Unscrew all the screws that hold the plastic cover in place and then disconnect the connector. At this point all that remains is to remove the worn filter and replace it with a new perfectly compatible model. Finally, replace the lid of the box and retighten the screws removed earlier. Also reconnect the connector and lower the hood.


Posted on 3 April 2024 by ScegliAuto



Replacing the cabin air filter on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this guide, let's see how to disassemble and replace the Chevrolet Equinox cabin air filter. First of all, we get on board the car, on the passeng
Chevrolet Equinox Air Filter Replacement
Chevrolet Equinox (2005-2009 / MK 1) In this video tutorial we will see how to disassemble and replace the Chevrolet Equinox engine air filter, following the instructions below. First, w
How to replace the air filter on Chevrolet Equinox 2008
Chevrolet Equinox (2005-2009 / MK 1) If the air filter inside the engine compartment of your Chevrolet Equinox Mk1 (year 2008) needs to be replaced and you don't know how to do it, don't

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos