Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate of the Chevrolet Silverado

Model: Chevrolet Silverado MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car door

See other generations:
Video tutorial

Today, you will see the main steps to remove and replace the tailgate of the Chevrolet Silverado bed in this video tutorial. First, open the tailgate and start by removing the two screws from the side brackets using a socket wrench.

Then, disconnect the electrical connector by lifting the red clip to completely remove the tailgate, as shown in the video. At this point, if necessary, replace the tailgate by applying the reverse procedure for reinstallation!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Remove the Tailgate on a Chevy Silverado
How to Remove the Tailgate on a Chevy Silverado
Chevrolet Silverado (2014-2018 / MK 3) In this video, see how to remove the tailgate from a Chevy Silverado: it is actually much easier than you might think, as there are no screws to remo…
How to Replace the Rear Headlight on a Chevrolet Silverado?
How to Replace the Rear Headlight on a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) Replacing the rear headlight on a Chevrolet Silverado pickup is a very simple and quick operation. Let's see how to proceed in this tutorial. Start b…
Replace the Rear Headlight on the Chevrolet Silverado MK2
Replace the Rear Headlight on the Chevrolet Silverado MK2
Chevrolet Silverado (2007-2014 / MK 2) In today's tutorial video, you will see how to disassemble and replace the rear headlight on the second generation Chevrolet Silverado by following t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos