Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Factory Radio in the Chevrolet Equinox

Model: Chevrolet Equinox MK 1 - Years 2005-2009
Part: Car stereo

Today, in this video tutorial, you will learn how to remove and replace the factory radio in the Chevrolet Equinox by following these simple and quick steps. First, get inside the vehicle and start by removing the plastic cover of the center console, prying it off from the sides; then disconnect the various wiring located at the back and remove the shift knob along with its base, as shown in the video. At this point, unscrew the radio screws and disconnect the electrical connectors to completely remove it; apply the reverse procedure for reassembly!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Chrome Handles on the Chevrolet Equinox
How to Install Chrome Handles on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this video, see how to install chrome handles instead of the body-colored ones on the Chevrolet Equinox. Start by opening the door, then remove th…
Where are the fuses located in the Chevrolet Equinox?
Where are the fuses located in the Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) The fuses in the Chevrolet Equinox are located within the dedicated fuse boxes present in the vehicle. This model has two: one is inside the cabin, o…
Replacing the Battery in the Chevrolet Equinox
Replacing the Battery in the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) Discover how to remove and replace the battery in the Chevrolet Equinox by following the instructions below. First, open the hood and start by removi…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos