Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Chrome Handles on the Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Handle

In this video, see how to install chrome handles instead of the body-colored ones on the Chevrolet Equinox. Start by opening the door, then remove the protective rubber from the door itself. Now, unscrew the screw inside that will allow you to detach the cover of the opening mechanism. Next, remove the cover. You can insert the new chrome handles into the original slots since they are identical to the factory ones. Proceed in reverse with the installation steps. This procedure also applies to the other handles on the vehicle.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Outer Door Handle on a Chevrolet Equinox Mk1
How to Replace the Outer Door Handle on a Chevrolet Equinox Mk1
Chevrolet Equinox (2005-2009 / MK 1) This guide shows how to replace the rear outer door handle on a Chevrolet Equinox Mk1. With the door open, remove the rubber cap located on the side.…
How to Replace the Outside Rearview Mirror on a Chevrolet Equinox?
How to Replace the Outside Rearview Mirror on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the outside rearview mirror on a Chevrolet Equinox, first remove the door panel by loosening the bolt located at the internal handle. Once…
How to Replace the Speakers in a Chevrolet Equinox
How to Replace the Speakers in a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) To replace the speaker in a Chevrolet Equinox, loosen the screws located under the window switch panel and inside the handle assembly. This will allo…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos