Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Equinox
    4. : How to replace the exterior rear door handle of the Chevrolet Equinox Mk1

Chevrolet Equinox - Video tutorial

Model: Chevrolet Equinox MK 1 - Years 2005-2009
Part: Handle
Operation: How to replace the exterior rear door handle of the Chevrolet Equinox Mk1

The guide shows how to replace the rear exterior handle of the Chevrolet Equinox Mk1. With the door open, remove the rubber plug on the side of the door. At this point it is necessary to unscrew the Torx T25 screw in such a way as to be able to remove the cover of the lock pawl. To remove the lever it will be necessary to pry towards the hinge of the handle and at the same time pull the piece. Once this element has been removed, it is advisable to clean the area with a cloth and reassemble the new handle. Insert the lever first and then the pawl cover. Refit the Torx screw and check the correct operation of the handle.


Posted on 4 October 2022 by ScegliAuto



How to disassemble the rear tailgate panel of the Chevrolet Equinox.
Chevrolet Equinox (2005-2009 / MK 1) Let's see these brief instructions that will allow us to disassemble and replace the rear door panel of the Chevrolet Equinox. First, we open the rea
How do you remove the Chevrolet Equinox door panel?
Chevrolet Equinox (2005-2009 / MK 1) In order to remove the door panel from the Chevrolet Equinox, you need to unscrew the screws that fix it to the door: the first is located in the sea
How do you replace the outside rearview mirror on the Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) In order to replace the rearview mirror of the Chevrolet Equinox, the door panel must be removed beforehand, which must be removed by loosening the b

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos