Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Trunk Lid on a Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

On the Chevrolet Equinox, the trunk lid may become stuck due to a malfunction in the control or the lock actuator. In such cases, you can perform an emergency opening of the trunk lid by following the simple procedure shown in this tutorial.

First, open the left rear door, then fully lower the rear seatback and position yourself inside the trunk. Next, locate the small indicated cap, remove it, and use a screwdriver to unlock the lock mechanism.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Hatch Panel of the Chevrolet Equinox
How to Remove the Rear Hatch Panel of the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) Follow these brief instructions to remove and replace the rear hatch panel of the Chevrolet Equinox. First, open the trunk hatch and start by removin…
How to Open the Remote and Replace the Battery for the Chevrolet Equinox
How to Open the Remote and Replace the Battery for the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) Follow these simple steps to open the key remote and replace the battery for the Chevrolet Equinox. First, take your remote and pry it open at the si…
What is the fuse diagram for the Chevrolet Equinox?
What is the fuse diagram for the Chevrolet Equinox?
Chevrolet Equinox (2018-2025 / MK 3) If some devices in our Chevrolet Equinox have suddenly stopped working, we can first check the status of the corresponding fuses, whose diagrams are …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos