Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Chevrolet Equinox?

Model: Chevrolet Equinox MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Air filter

See other generations:
Video tutorial

As we can see in this tutorial, replacing the air filter in a Chevrolet Equinox is very simple. First, get the correct replacement part, which can also be purchased online, and a 7mm socket wrench.

Make sure the engine is off and cold before starting. Next, open the hood, locate the air filter box on the passenger side, and remove the bolts found in the four corners.

Once the box is open, remove the old filter and clean the inside thoroughly. Finally, insert the new filter in the correct orientation and reassemble everything by following the reverse procedure.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on the Chevrolet Equinox
Replacing the Air Filter on the Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) In this video tutorial, you will learn how to remove and replace the engine air filter on the Chevrolet Equinox, following the instructions below. Fi…
Replacing the Cabin Air Filter on the Chevrolet Equinox
Replacing the Cabin Air Filter on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) This guide shows you how to remove and replace the cabin air filter on the Chevrolet Equinox. First, get inside the vehicle on the passenger side and…
How to Replace the Air Filter in a 2008 Chevrolet Equinox
How to Replace the Air Filter in a 2008 Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) If the air filter in the engine compartment of your 2008 Chevrolet Equinox Mk1 needs to be replaced and you don't know how, don't worry because below…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos