Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery for the Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

If you need to replace the key fob battery for this vehicle, follow the instructions below. First, extract the emergency key by pressing the small button on the side.

Then, take a small screwdriver to pry open the joint between the cover and the fob itself. Once the cover is removed, you will have access to the compartment containing the battery, which you can remove using the same small screwdriver.

Next, take the new battery and place it in the compartment, then reattach the cover and insert the emergency key back.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Chevrolet Equinox
How to Replace the Key Battery of the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) This guide will show you the steps to replace the dead key battery of your Chevrolet Equinox. You will only need a common flathead screwdriver or a s…
How to Replace the Key Battery on the Chevrolet Equinox 3
How to Replace the Key Battery on the Chevrolet Equinox 3
Chevrolet Equinox (2018-2025 / MK 3) To correctly replace the button battery located inside the smart key of your Chevrolet Equinox Mk3 (2018-2022), simply follow these easy steps. First…
How to Replace the Battery in the Chevrolet Equinox Remote?
How to Replace the Battery in the Chevrolet Equinox Remote?
Chevrolet Equinox (2010-2017 / MK 2) In this tutorial, you will see how to replace the battery in the Chevrolet Equinox remote, a very simple and quick operation. To do this, get a small…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos