Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on the Chevrolet Equinox 3

Model: Chevrolet Equinox MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

See other generations:
Video tutorial

To correctly replace the button battery located inside the smart key of your Chevrolet Equinox Mk3 (2018-2022), simply follow these easy steps. First, press and hold the small button on the side of the cover and fully remove the physical emergency key. Next, use the key you just removed to open the cover and access the dead battery.

Finally, remove the old battery and replace it with a new one (model ECR 2032). Reassemble the cover correctly, and you are done.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Chevrolet Equinox
How to Replace the Key Battery of the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) This guide will show you the steps to replace the dead key battery of your Chevrolet Equinox. You will only need a common flathead screwdriver or a s…
How to Replace the Key Fob Battery for the Chevrolet Equinox
How to Replace the Key Fob Battery for the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) If you need to replace the key fob battery for this vehicle, follow the instructions below. First, extract the emergency key by pressing the small bu…
How to Replace the Battery in the Chevrolet Equinox Remote?
How to Replace the Battery in the Chevrolet Equinox Remote?
Chevrolet Equinox (2010-2017 / MK 2) In this tutorial, you will see how to replace the battery in the Chevrolet Equinox remote, a very simple and quick operation. To do this, get a small…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos