Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Colorado
    4. : How to disassemble the speakers of the Chevrolet Colorado

Chevrolet Colorado - Video tutorial

Model: Chevrolet Colorado MK 1 - Years 2004-2012
Part: Loudspeaker
Operation: How to disassemble the speakers of the Chevrolet Colorado

Let's see in this short and simple guide how to disassemble and replace the front speaker of the Chevrolet Coloradio, following the instructions below. First of all, we open the front door and start removing the door panel; to do this, unscrew the fixing screws that we find on it, then disassemble the window control panel and disconnect the electrical connector, as shown in the video. Once the door panel has been removed, we can remove the speaker by unscrewing the screws and disconnecting the electrical connector; let's replace it with the new one and reassemble everything!


Posted on 19 May 2024 by ScegliAuto



Chevrolet Colorado Headlight Bulb Replacement
Chevrolet Colorado (2015-2022 / MK 2) In today's video we will see the instructions on how to disassemble and replace the headlight bulb of the Chevrolet Colorado, in simple and quick ste
Chevrolet Colorado headlights replacement
Chevrolet Colorado (2004-2012 / MK 1) Let's see in this guide how to disassemble and replace the headlights of the Chevrolet Colorado, following the instructions below. First we open the
How to replace the battery of the Chevrolet Colorado
Chevrolet Colorado (2015-2022 / MK 2) Let's see in this guide how to disassemble and replace the Chevrolet Colorado battery, following the instructions below. First of all we open the bon

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos