Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the 2018 Chevrolet Trax

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Warning light – error code

Manually resetting the maintenance (or service) light on your 2018 Chevrolet Trax is a routine operation required after each service. No diagnostic tools are needed, and the various steps are described below. First, turn on the car's ignition and then locate the "Menu" and "Set/CLR" buttons on the left lever of the steering wheel. Press the "Menu" button multiple times until the vehicle maintenance option appears on the display. Then, hold down the "Set/CLR" button and release it as soon as the reset is successfully completed.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light of the Chevrolet Trax
How to Reset the Oil Light of the Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To correctly reset the engine oil light of your Chevrolet Trax, simply follow these easy steps. First, enter the cabin and reach the driver's seat. N…
How to Reset the TPMS Light on a Chevrolet Trax
How to Reset the TPMS Light on a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To manually reset the TPMS light on your Chevrolet Trax, follow these steps. First, get inside the car and turn on the instrument cluster. Immediatel…
How to reset the oil light on the 2015 Chevrolet Trax
How to reset the oil light on the 2015 Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) If you own a 2015 Chevrolet Trax and want to manually and autonomously reset the engine oil light, all you have to do is follow the various steps des…

Other guides you may be interested in

    Frequently Asked Questions

    • Trax 2013-2022 - What does code 128 mean on the Chevrolet Trax? Read answer
    • Trax 2013-2022 - When does code 24 appear on the Chevrolet Trax? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos