Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Trax
    4. : How to reset the oil light on a Chevrolet Trax.

Chevrolet Trax - Video tutorial

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Instrument cluster
Operation: How to reset the oil light on a Chevrolet Trax.

To correctly reset the engine oil light on your Chevrolet Trax, simply follow these simple steps. First, go inside the car and reach the driver's seat. Then, turn on the ignition and press the "Menu" button located on the left lever of the steering wheel. Then, scroll through the menu and find the "oil life remaining" option. Hold down the "Set/CLR" button and release it as soon as you are asked if you want to proceed with resetting the light. Select "Yes" and you're done.


Posted on 14 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Trax 2013-2022 - What does code 82 mean on the Chevrolet Trax? Read Answer
    • Trax 2013-2022 - What does code 82 indicate in the Chevrolet Trax? Read Answer
    • Trax 2013-2022 - What does error 89 on Chevrolet Trax mean? Read Answer
    • Trax 2013-2022 - What does the 128 code in the Chevrolet Trax mean? Read Answer
    • Trax 2013-2022 - What does it mean when fault code 89 comes on on Chevrolet Trax ? Read Answer
    • Trax 2013-2022 - What does the Chevrolet Trax error code 82 mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos