Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the 2017 Chevrolet Trax

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Service warning light

To manually reset the oil light on your 2017 Chevrolet Trax, you only need to use two buttons. Just carefully follow the instructions below. First, enter the car and turn on the ignition. Then, locate the "Menu" button on the left side of the steering wheel and press it several times until the screen displays the oil life information. Finally, hold down the "Set/Clr" button and confirm the reset of the light. A few moments later, the procedure will be successfully completed.

Posted on 9 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2015 Chevrolet Trax
How to reset the oil light on the 2015 Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) If you own a 2015 Chevrolet Trax and want to manually and autonomously reset the engine oil light, all you have to do is follow the various steps des…
How to Reset the Oil Light of the Chevrolet Trax
How to Reset the Oil Light of the Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To correctly reset the engine oil light of your Chevrolet Trax, simply follow these easy steps. First, enter the cabin and reach the driver's seat. N…
How do you reset the Service light on the Chevrolet Trax?
How do you reset the Service light on the Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) In order to reset the Service light of the Chevrolet Trax, you need to turn on the instrument panel by inserting the ignition key into the correspond…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos