Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Trax
    4. : How to reset the oil light on a Chevrolet Trax.

Chevrolet Trax - Video tutorial

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Instrument cluster
Operation: How to reset the oil light on a Chevrolet Trax.

In this new guide dedicated to your Chevrolet Trax, we will discover the various steps required to correctly complete the manual reset procedure of the engine oil light. First of all, go inside the vehicle and turn on the instrument panel. At this point, shift your attention to the left lever of the steering wheel and press the "Menu" button. Then, use the small knob located to its left to navigate through the menu itself and locate the item related to the remaining life of the oil. Finally, press the "Set/Clr" button and confirm the reset of the light.


Posted on 22 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Trax 2013-2022 - What does code 82 mean on the Chevrolet Trax? Read Answer
    • Trax 2013-2022 - What does code 82 indicate in the Chevrolet Trax? Read Answer
    • Trax 2013-2022 - What does error 89 on Chevrolet Trax mean? Read Answer
    • Trax 2013-2022 - What does the 128 code in the Chevrolet Trax mean? Read Answer
    • Trax 2013-2022 - What does it mean when fault code 89 comes on on Chevrolet Trax ? Read Answer
    • Trax 2013-2022 - What does the Chevrolet Trax error code 82 mean? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos