Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Chevrolet Silverado

Model: Chevrolet Silverado MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

If the oil change warning light appears even after performing this operation, you will need to manually reset the sensor by directly using the vehicle's controls. The steps to follow are very simple.

First, insert the key and turn on the ignition. At the same time, press the accelerator pedal three times in quick succession within five seconds.

Once the chime stops sounding intermittently, turn off the ignition, and the reset is successfully completed. You just need to start the vehicle to get the final confirmation.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Chevrolet Silverado?
How to Reset the Oil Change Light on a Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) To reset the Oil Change light on a Chevrolet Silverado, turn the key to the "On" position to activate the instrument cluster. Use the button located …
How to Reset the Oil Light on a Chevrolet Silverado
How to Reset the Oil Light on a Chevrolet Silverado
Chevrolet Silverado (2019-2026 / MK 1) The procedure to reset the engine oil change light on a Chevrolet Silverado is quite simple. Just follow these instructions closely, and you will com…
How to Reset the Oil Change Light on a Chevrolet Silverado Mk3
How to Reset the Oil Change Light on a Chevrolet Silverado Mk3
Chevrolet Silverado (2014-2018 / MK 3) This guide shows how to reset the engine oil change light on a Chevrolet Silverado Mk3. No special tools are needed to reset the engine oil life ligh…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos