Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Malibu
    4. : How to replace the cabin air filter in a Chevrolet Malibu

Chevrolet Malibu - Video tutorial

Model: Chevrolet Malibu MK 9 - Years 2016-2023
Part: Cabin air filter
Operation: How to replace the cabin air filter in a Chevrolet Malibu

In this video tutorial we can see how it is possible to replace the cabin air filter in a Chevrolet Malibu, following some simple steps: the first thing to do is to buy a new and quality cabin filter from an authorized dealer; next step, we need to get in the car, turn off the car and pull the handbrake; the cabin filter can be found behind the glove compartment, so we must remove all the material inside it. Open the drawer and remove the side thread then press the sides of the drawer inwards to completely lower the compartment; open the filter cover with a screwdriver, remove the old filter element, insert the new pollen filter following the indications of the arrows on the filter; replace the cover and secure it with the appropriate tab.


Posted on 12 October 2022 by ScegliAuto



How to replace the cabin air filter of the 2016 Chevrolet Malibu.
Chevrolet Malibu (2016-2023 / MK 9) To successfully replace the cabin air filter of your Chevrolet Malibu Mk2 (2016), simply follow the instructions below. First, access the interior of
How to replace the engine air filter of the Chevrolet Malibu.
Chevrolet Malibu (2013-2019 / MK 8) To independently complete the replacement of the cabin air filter on your Chevrolet Malibu (year 2013-2015), simply follow these steps. First, go out
The procedure to replace the cabin filter in a Chevrolet Malibu.
Chevrolet Malibu (2008-2012 / MK 7) In this video tutorial, we can see how to perform the procedure to replace the cabin filter in a Chevrolet Malibu: first of all, we go to buy a new c

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos