Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Blazer
    4. : How to replace the air filter in a Chevrolet Blazer

Chevrolet Blazer - Video tutorial

Model: Chevrolet Blazer - Years 1998-2005
Part: Air filter
Operation: How to replace the air filter in a Chevrolet Blazer

In this video tutorial we can see how it is possible to replace the air filter in a Chevrolet Blazer, following a few simple steps: the first thing to do is to buy a new and quality air filter, from an authorized dealer ; next step we have to get in the car, turn off the car and pull the handbrake; lift the bonnet and secure it with a special rod; use a Phillips screwdriver to unscrew the fasteners of the filter cover; loosen the clamp that connects the filter box to the suction pipe, disconnect the electric cable. Lift the cover, remove the old filter element, cover the air duct parts with a clean cloth to prevent dirt from getting into the system, clean the filter housing and cover, remove the cloth and insert the new air filter in place, replace the cover and secure it.


Posted on 14 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos