Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on the Chevrolet Silverado

Model: Chevrolet Silverado MK 3 - Years 2014-2018
Part: Service warning light

The oil change warning light alerts the driver of the need to perform this maintenance after a certain number of miles. Sometimes it may continue to illuminate even though the change was done recently. In this case, a quick reset is all that is needed to resolve the issue. Here’s how to do it. Make sure to start the vehicle and view the oil life remaining on the mini display. At this point, press the accelerator pedal three times in a row, and the reset is complete.

Updated on 19 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Oil Change Light on a Chevrolet Silverado Mk3
How to Reset the Oil Change Light on a Chevrolet Silverado Mk3
Chevrolet Silverado (2014-2018 / MK 3) This guide shows how to reset the engine oil change light on a Chevrolet Silverado Mk3. No special tools are needed to reset the engine oil life ligh…
How to Reset the Oil Light on a Chevrolet Silverado
How to Reset the Oil Light on a Chevrolet Silverado
Chevrolet Silverado (2019-2026 / MK 1) The procedure to reset the engine oil change light on a Chevrolet Silverado is quite simple. Just follow these instructions closely, and you will com…
How to Reset the Oil Change Light on a Chevrolet Silverado?
How to Reset the Oil Change Light on a Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) To reset the Oil Change light on a Chevrolet Silverado, turn the key to the "On" position to activate the instrument cluster. Use the button located …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos