Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing on a Chevrolet Spark

Model: Chevrolet Spark MK 1, M300 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Bearing

See other generations:
Video tutorial

To replace the rear wheel bearing on a Chevrolet Spark, you need to lift the car so that the corresponding wheel is not in contact with the ground. This will allow you to loosen the bolts that secure the wheel to the hub, enabling its removal to access the drum at the rear.

The drum can be removed from its housing by unscrewing the bolts, and once removed, you will need to pull out the bearing located at its centre. This will allow you to insert the new one, refitting all previously removed parts.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) In this tutorial, you will see the steps to remove and replace the ignition coil connected to the spark plugs, which allows the current to pass for t…
How to Replace the Fuel Filter of a Chevrolet Spark?
How to Replace the Fuel Filter of a Chevrolet Spark?
Chevrolet Spark (1998-2016 / M100, M150) To replace the fuel filter of a Chevrolet Spark, loosen the screws securing it to its housing: the part is located at the rear right of the vehicle, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos