Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Chevrolet Equinox?

Model: Chevrolet Equinox MK 1 - Years: 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel of the Chevrolet Equinox, unscrew the bolts that secure it to the door. The first bolt is located in the handle pocket, from which you will also need to detach the plastic cover.

After removal, detach the trim along the armrest to access the screws underneath. Once these screws are removed, detach the cover near the exterior mirror, and only then can you remove the door panel.

After removing the old panel, you can install a new replacement part.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Speakers in a Chevrolet Equinox
How to Replace the Speakers in a Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) To replace the speaker in a Chevrolet Equinox, loosen the screws located under the window switch panel and inside the handle assembly. This will allo…
How to Replace the Outside Rearview Mirror on a Chevrolet Equinox?
How to Replace the Outside Rearview Mirror on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the outside rearview mirror on a Chevrolet Equinox, first remove the door panel by loosening the bolt located at the internal handle. Once…
How to Replace the Window Regulator on a Chevrolet Equinox?
How to Replace the Window Regulator on a Chevrolet Equinox?
Chevrolet Equinox (2005-2009 / MK 1) To replace the window regulator on a Chevrolet Equinox, loosen the screws that secure the corresponding door panel: the screws are located inside the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos