Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speakers in a Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Speaker

See other generations:
Video tutorial

To replace the speaker in a Chevrolet Equinox, loosen the screws located under the window switch panel and inside the handle assembly. This will allow you to remove the door panel.

Once the panel is removed, you can access the speaker and loosen the screws that secure it to the door, also disconnecting the connector. After the old speaker is removed, connect the new one to the connector and secure it with the appropriate screws, then reattach the door panel.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace Spark Plugs on a Chevrolet Equinox?
How to Replace Spark Plugs on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the spark plugs on a Chevrolet Equinox, open the hood to remove the cover from the top of the engine block. Once the cover is removed, dis…
How to Replace the Windshield Wiper Blades on a Chevrolet Equinox
How to Replace the Windshield Wiper Blades on a Chevrolet Equinox
Chevrolet Equinox (2005-2009 / MK 1) To replace the windshield wiper blades on a Chevrolet Equinox, lift the wiper arms so that they are not in direct contact with the windshield. Next, …
How to Replace Spark Plugs on a Chevrolet Equinox?
How to Replace Spark Plugs on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the spark plugs on a Chevrolet Equinox, open the hood to access the internal components of the engine compartment. Next, loosen the side b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos