Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Chevrolet Onix

Model: Chevrolet Onix MK 2 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Air filter

See other generations:
Video tutorial

If you intend to replace the air filter on this vehicle model, the description below provides all the necessary steps for a proper replacement. Lift the hood and locate the air filter housing on the right side of the compartment.

Get a screwdriver to remove the screws at the corners of the housing cover. Then, lift the cover to access the compartment containing the filter, remove it, and replace it with the new one. Finally, reposition the cover over the compartment and reattach the screws.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Chevrolet Onix
How to Replace the Cabin Filter on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) To replace the cabin filter on a Chevrolet Onix, open the glove compartment located on the passenger side. Detach the retaining pins inside the compa…
How to Install Door Sills on a Chevrolet Onix
How to Install Door Sills on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Let's see how to install door sills on the front doors of a Chevrolet Onix. It's actually very simple. First, clean and degrease the area of the body…
How to Remove the Factory Radio from the Chevrolet Onix
How to Remove the Factory Radio from the Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Today's main instructions will show you how to disassemble and replace the factory radio of the Chevrolet Onix in simple steps. First, get inside the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos