Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on Chevrolet Onix

Model: Chevrolet Onix MK 2 - Years 2020-2026
Part: Cabin air filter

In this video tutorial, you can see how to replace the cabin air filter on a Chevrolet Onix by following a few simple steps: the first thing to do is purchase a new cabin air filter; the next step is to get inside the vehicle, turn off the car, and engage the parking brake. The cabin filter on this vehicle is located behind the glove compartment, so you need to lift the glove box door and remove all the items inside. Use a T20 Torx wrench to remove the fasteners of the glove compartment. Remove the glove compartment from its place and disconnect the power connector. Now, you need to remove the cover of the cabin filter box and take out the old filter from its slot. Install the new filter following the arrow indications on the filter itself.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Chevrolet Onix
How to Replace the Cabin Filter on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) To replace the cabin filter on a Chevrolet Onix, open the glove compartment located on the passenger side. Detach the retaining pins inside the compa…
How to Replace the Headlight Bulb on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Today, follow the steps to remove and replace the low beam bulb of the front headlight on the Chevrolet Onix. First, open the hood of your car and st…
How to Replace the Air Filter on the Chevrolet Onix
How to Replace the Air Filter on the Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) If you intend to replace the air filter on this vehicle model, the description below provides all the necessary steps for a proper replacement. Lift …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos