Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Chevrolet Silverado

Model: Chevrolet Silverado MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

In this brief video tutorial, you will learn how to replace the remote battery in a Chevrolet Silverado, model years 2019 to 2021. First, press the release button located at the bottom of the remote and pull out the physical key. Now, use the extracted key to pry open the remote in the designated space.

Once the remote is open, use a small flathead screwdriver to remove the old battery from its compartment, then insert a new battery with the positive side facing down and close the remote.

The required battery for this model is a CR2032 3V.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to replace the battery in the Chevrolet Silverado car remote.
How to replace the battery in the Chevrolet Silverado car remote.
Chevrolet Silverado (2014-2018 / MK 3) Today we will explain how to replace the battery of the 2015 Chevrolet Silverado remote control. To perform the replacement, we need to use a flat-he…
How to Replace the Remote Battery in a Chevrolet Silverado 2
How to Replace the Remote Battery in a Chevrolet Silverado 2
Chevrolet Silverado (2007-2014 / MK 2) To correctly replace the button battery inside the remote of your Chevrolet Silverado second generation (model years 2007-2014), follow these simple …
How to Replace the Key Battery in a Chevrolet Silverado
How to Replace the Key Battery in a Chevrolet Silverado
Chevrolet Silverado (2019-2026 / MK 1) When the remote for your vehicle stops working, the cause is almost always related to a dead battery in the remote. To get the remote working again, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos