Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the front fenders on the Chevrolet Equinox?

Model: Chevrolet Equinox MK 2 - Years 2010-2017
Part: Body

In this tutorial, we can see how to remove the front fenders in the Chevrolet Equinox, a very simple and quick operation. First of all, we lift the side on which we will be working with a jack, taking all necessary precautions. Then, we remove the wheel, remove the two plastic rivets, and unscrew the two screws located on the inner lower area. Once the plastic cover is removed, we unscrew both the lower and upper fender mounting bolts, both with a 7mm socket wrench. Finally, we remove all remaining bolts and separate the fender from the frame.

Posted on 4 July 2023 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you remove the front headlight of a Chevrolet Equinox?
How do you remove the front headlight of a Chevrolet Equinox?
Chevrolet Equinox (2005-2009 / MK 1) To remove the front headlight of the Chevrolet Equinox, you need to pry at the bottom of the car's front molding so that it can be removed. After thi…
How do you replace the Chevrolet Equinox oil filter?
How do you replace the Chevrolet Equinox oil filter?
Chevrolet Equinox (2010-2017 / MK 2) In order to replace the Chevrolet Equinox oil filter, you have to open the hood to access the engine compartment. The part to be replaced will in fac…
How to remove the front bumper of the Chevrolet Equinox MK2
How to remove the front bumper of the Chevrolet Equinox MK2
Chevrolet Equinox (2010-2017 / MK 2) Today we will discover the procedure necessary for the disassembly and replacement of the front bumper of the second series Chevrolet Equinox. First …

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos