Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission Fluid in a Chevrolet Sonic?

Model: Chevrolet Sonic T300 - Years 2012-2020
Part: Transmission fluid

In this tutorial, you will see how to replace the automatic transmission fluid in a Chevrolet Sonic, a very simple and quick operation. First, ensure the engine is cold, then raise the front of the vehicle and open the hood. Next, position a container underneath the transmission, locate the drain plug, remove it with an 11mm socket wrench, and let all the fluid drain out of the system. At this point, simply tighten the plug, open the top fill cap, and using a long funnel, add the necessary amount of fluid to reach the maximum level.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2015 Chevrolet Sonic
How to Reset the Oil Light on a 2015 Chevrolet Sonic
Chevrolet Sonic (2012-2020 / T300) If the oil light appears on the mini display of your 2015 Chevrolet Sonic's instrument cluster even after you have recently changed the oil, don't wo…
How to Replace the Battery in a Chevrolet Sonic?
How to Replace the Battery in a Chevrolet Sonic?
Chevrolet Sonic (2012-2020 / T300) To replace the battery in a Chevrolet Sonic, open the hood to access the components inside the engine compartment. The battery is located near the le…
How to Replace the Key Battery of the Chevrolet Sonic
How to Replace the Key Battery of the Chevrolet Sonic
Chevrolet Sonic (2012-2020 / T300) If you are looking for a guide to help you replace the key battery of your Chevrolet Sonic, just follow the steps described below. Fortunately, this …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos