Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission Fluid on a Chevrolet Sail

Model: Chevrolet Sail MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Transmission fluid

See other generations:
Video tutorial

If you need to replace the transmission fluid on this vehicle, follow the steps outlined below, which are also shown in the video. First, lift the vehicle and place it on a lift.

Locate the transmission fluid drain plug under the differential and remove it. Position a container underneath to catch the used oil and wait for all the fluid to drain out. Then, reinstall the plug and use a small pump with a rubber hose to fill it with new oil.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Chevrolet Sail
How to Replace the Radio in a Chevrolet Sail
Chevrolet Sail (2010-2017 / MK 2) In this guide, find instructions on how to remove and replace the factory radio in a Chevrolet Sail. First, get in the vehicle and start by removing …
How to Replace the Cabin Air Filter in a Chevrolet Sail?
How to Replace the Cabin Air Filter in a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) As you can see in this tutorial, replacing the cabin air filter in a Chevrolet Sail is an extremely simple and quick task. First, sit in the passenge…
How to Install an Android Car Stereo in the Chevrolet Sail
How to Install an Android Car Stereo in the Chevrolet Sail
Chevrolet Sail (2000-2009 / MK 1) In this short and simple guide, you will find instructions to remove the factory radio and install a new Android-compatible unit in the Chevrolet Sai…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos