Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Light Bulb on Chrysler Voyager

Model: Chrysler Chrysler Various
Part: Tail light bulb

Video tutorial

In this video tutorial, you will see how to dismantle the rear light and replace the bulbs on a Chrysler Voyager. First, open the boot lid and use a lever or flat screwdriver to remove the clips on the edge of the light; then, pull the light out from the outside and remove the bulbs, taking them out with the entire bulb holder.

If you want to detach the entire light for bench work, simply disconnect the electrical connector. Once you have replaced the necessary bulbs, reassemble everything as shown in the video!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Remove an EGR Valve from a Chrysler Voyager
Chrysler Chrysler Various Before you start, open the bonnet of your Chrysler Voyager. Begin by unscrewing and removing the two bolts that secure the hose connected to the EGR …
How to replace the rear tailgate lock in the Chrysler Town & Country?
How to replace the rear tailgate lock in the Chrysler Town & Country?
Chrysler Chrysler Various In this tutorial we can see how to replace the rear hatch lock in the Chrysler Town & Country, an extremely simple and quick operation. First of all,…
How to Replace the Windscreen Washer Jet on a Chrysler 200?
How to Replace the Windscreen Washer Jet on a Chrysler 200?
Chrysler Chrysler Various To replace the windscreen washer jet on a Chrysler 200, lift the bonnet and locate the old jet. This will be found in the part of the bonnet directly…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos