Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove an EGR Valve from a Chrysler Voyager

Model: Chrysler Chrysler Various
Part: EGR valve

This video is currently unavailable

Before you start, open the bonnet of your Chrysler Voyager. Begin by unscrewing and removing the two bolts that secure the hose connected to the EGR valve, then remove the hose itself.

Once done, move the valve backwards. This will give you access to the bolts securing the EGR valve.

Proceed to unscrew and remove these bolts as well. After completing this step, you can remove the EGR valve, finishing the disassembly.

To fit the new valve, simply follow this procedure in reverse, and the replacement will be complete.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Replacing Rear Light Bulb on Chrysler Voyager
Replacing Rear Light Bulb on Chrysler Voyager
Chrysler Chrysler Various In this video tutorial, you will see how to dismantle the rear light and replace the bulbs on a Chrysler Voyager. First, open the boot lid and use a …
How to Bleed and Replace the Coolant on Chrysler 300c 3.5L V6
How to Bleed and Replace the Coolant on Chrysler 300c 3.5L V6
Chrysler Chrysler Various In this short video, follow the steps to bleed and replace the coolant or antifreeze on a Chrysler 300c 3.5L V6 from 2006. First, lift the vehicle an…
How to Replace the Windscreen Washer Jet on a Chrysler 200?
How to Replace the Windscreen Washer Jet on a Chrysler 200?
Chrysler Chrysler Various To replace the windscreen washer jet on a Chrysler 200, lift the bonnet and locate the old jet. This will be found in the part of the bonnet directly…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos