Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Injectors on Chrysler PT Cruiser

Model: Chrysler Chrysler Various
Part: Fuel injectors

Video tutorial

Working with the engine off and the handbrake engaged, lift the bonnet and secure it. Obtain two socket wrenches, one 10 mm and one 13 mm, then remove all the bolts located at the front of the engine bay, as indicated in the video. Disconnect the connectors and also remove the rear bolts and the rubber hose.

Now remove the bracket located at the front of the engine bay, and at this point, you can unscrew and then remove the injectors to replace them with equivalent ones you have purchased. After doing this, reassemble everything you have disassembled in reverse order.

Good luck!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Removing the External Wing Mirror on a Chrysler 300c
Removing the External Wing Mirror on a Chrysler 300c
Chrysler Chrysler Various In this video tutorial, learn how to remove and replace the external wing mirror on a Chrysler 300c by following these simple and quick steps. First,…
How to Remove an EGR Valve from a Chrysler Voyager
Chrysler Chrysler Various Before you start, open the bonnet of your Chrysler Voyager. Begin by unscrewing and removing the two bolts that secure the hose connected to the EGR …
Where is the Windscreen Wiper Fuse in a Chrysler Town?
Where is the Windscreen Wiper Fuse in a Chrysler Town?
Chrysler Chrysler Various If the windscreen wipers on your Chrysler Town have suddenly stopped working, first check the status of the relevant fuse, the location of which is i…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos