Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C2
  6. : Battery

Citroen C2 - Battery

Citroen C2 (2003-2010 / MK 1)
How to replace the Citroen C2 battery

To replace the battery of your Citroen C2 (year 2003-2010) you just need to carefully follow the instructions in our new mini guide dedicated to you. First of …read all…
Posted on 7 September 2022 by ScegliAuto
Citroen C2 (2003-2010 / MK 1)
Citroen C2 / C3 battery replacement

The video refers to the citroen c3 but the operations are the same for the c2 as they use the same engine. Open the bonnet, remove the plastic protective cover …read all…
Posted on 14 December 2023 by ScegliAuto

Car stereo (2) Battery (2) Key (4) Timing belt (1) -board computer (2) Checks and maintenance (9) Gearshift gaiter (1) Brake discs (1) Tail light (2) Fog lights (1) Cabin air filter (3) Reverse gear switch (1) Light bulb (1) Headlight bulb (2) Rear light bulb (2) Engine (1) Window motor (1) Starter motor (1) Gear oil (1) Engine oil (2) Door (1) Instrument cluster (2) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (10) Outside rearview mirror (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos