Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C2
    4. : Cabin air filter

Citroen C2 - Cabin air filter

Cabin Air Filter Citroen C2 (2003-2010 / mk 1)

Citroen C2 (2003-2010 / MK 1)
How to Replace the Cabin Filter on a Citroen C2
In this new mini guide for all Citroen C2 owners (2003-2010), we will describe the steps necessary to independently replace the cabin air filter. First, park …Read all…
Posted on 10 July 2026 by ScegliAuto
Citroen C2 (2003-2010 / MK 1)
Changing the Cabin Air Filter
Lift the bonnet of the engine compartment. Locate the position of the filter, which is situated in a black plastic housing near the windscreen (housing …Read all…
Posted on 1 March 2026 by ScegliAuto
Citroen C2 (2003-2010 / MK 1)
Replacing the Cabin Air Filter
The cabin air filter is not located inside the vehicle but in the engine bay, just below the windscreen, on the passenger side. It is practically in line with …Read all…
Posted on 27 February 2026 by ScegliAuto
Speaker (1) Car stereo (3) Battery (4) Transmission (1) Body (1) Glove compartment (1) Key (5) Timing belt (1) Onboard computer (1) Checks and maintenance (4) Shifter boot (1) Brake rotors (1) Tail light (2) Fog lights (1) Cabin air filter (3) Parking brake (1) Fuel injectors (1) Reverse light switch (1) Light bulb (1) Headlight bulb (4) Tail light bulb (2) Engine (1) Power window motor (1) Starter motor (2) Transmission fluid (1) Engine oil (2) Clock (1) Brake pads (1) Car door (1) Instrument cluster (1) Radiator (1) Heater core (1) Wheel (3) Fuse box (13) Seat (1) Side mirror (3) Warning light – error code (4) (1) Service warning light (15)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos