Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C2
    4. : -board computer

Citroen C2 - -board computer

Citroen C2 (2003-2010 / MK 1)
How to reset the service light on the Citroen C2
The reset of the service light for the car, indicated on the instrument panel with the wrench symbol, follows a very simple and fast procedure, fully …read all…
Posted on 4 April 2024 by ScegliAuto
Citroen C2 (2003-2010 / MK 1)
Change the computer read parameters
Today's cars have computers that make driving easier. The various manufacturers already foresee the conversion from the metric system to the imperial system …read all…
Posted on 8 July 2023 by ScegliAuto
Car stereo (2) Battery (2) Key (4) Timing belt (1) -board computer (2) Checks and maintenance (9) Gearshift gaiter (1) Brake discs (1) Tail light (2) Fog lights (1) Cabin air filter (3) Reverse gear switch (1) Light bulb (1) Headlight bulb (2) Rear light bulb (2) Engine (1) Window motor (1) Starter motor (1) Gear oil (1) Engine oil (2) Door (1) Instrument cluster (2) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (10) Outside rearview mirror (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos