Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C2
    4. : Headlight bulb

Citroen C2 - Headlight bulb

Citroen C2 (2003-2010 / MK 1)
Replacement of the front indicator bulb of the Citroen C2
In this guide, we will see the steps that will allow us to remove and replace all the bulbs of the front light, as well as the side light bulb, the low beam …read all…
Posted on 19 April 2023 by ScegliAuto
Citroen C2 (2003-2010 / MK 1)
How to replace the headlight bulb on a Citroen C2
Before we can begin, we will have to go and open the front hood of the Citroen C2. So let's start by going to disengage the rear cover of the burned out light …read all…
Posted on 10 January 2024 by ScegliAuto
Car stereo (2) Battery (2) Key (4) Timing belt (1) -board computer (2) Checks and maintenance (9) Gearshift gaiter (1) Brake discs (1) Tail light (2) Fog lights (1) Cabin air filter (3) Reverse gear switch (1) Light bulb (1) Headlight bulb (2) Rear light bulb (2) Engine (1) Window motor (1) Starter motor (1) Gear oil (1) Engine oil (2) Door (1) Instrument cluster (2) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (10) Outside rearview mirror (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos