Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C2
    4. : Tail light bulb

Citroen C2 - Tail light bulb

Tail Light Bulb Citroen C2 (2003-2010 / mk 1)

Citroen C2 (2003-2010 / MK 1)
How to Replace the Rear Light Bulb on a Citroën C2?
To replace the rear light bulb on a Citroën C2, open the tailgate to access the side of the boot corresponding to the light. Here, locate the screw securing …Read all…
Posted on 10 August 2026 by ScegliAuto
Citroen C2 (2003-2010 / MK 1)
Replacing Rear Headlight Bulbs on Citroen C2
Let's see how to remove and replace the bulbs of the rear headlight on a Citroen C2 by following these simple instructions. First, open the boot lid and …Read all…
Posted on 19 June 2026 by ScegliAuto
Speaker (1) Car stereo (3) Battery (4) Transmission (1) Body (1) Glove compartment (1) Key (5) Timing belt (1) Onboard computer (1) Checks and maintenance (4) Shifter boot (1) Brake rotors (1) Tail light (2) Fog lights (1) Cabin air filter (3) Parking brake (1) Fuel injectors (1) Reverse light switch (1) Light bulb (1) Headlight bulb (4) Tail light bulb (2) Engine (1) Power window motor (1) Starter motor (2) Transmission fluid (1) Engine oil (2) Clock (1) Brake pads (1) Car door (1) Instrument cluster (1) Radiator (1) Heater core (1) Wheel (3) Fuse box (13) Seat (1) Side mirror (3) Warning light – error code (4) (1) Service warning light (15)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos