Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C2
  6. : Key

Citroen C2 - Key

Citroen C2 (2003-2010 / MK 1)
How to replace the shell and key of the Citroen C2 remote control.

Today's instructions will show us how to disassemble and replace the key and shell of the Citroen C2 remote control, in simple steps. First, we take our remote …read all…
Posted on 9 September 2023 by ScegliAuto
Citroen C2 (2003-2010 / MK 1)
How to replace the battery in the remote control of the Citroà «n C2?

In order to replace the battery of the remote control of the Citroà «n C2 you have to pry an object such as a screwdriver, inside the groove that forms …read all…
Posted on 17 July 2022 by ScegliAuto
Citroen C2 (2003-2010 / MK 1)
How to replace the battery of the key of the Citroen C2

Thanks to the following mini guide you will be able to replace the key battery of your Citroen C2 without any difficulty and in a few minutes. Let's find out …read all…
Posted on 1 July 2022 by ScegliAuto
Citroen C2 (2003-2010 / MK 1)
How can I reprogram the remote control of the Citroà «n C2?

To be able to reprogram the remote control of the Citroà «n C2, it is necessary to close the device correctly after the battery has been replaced: it will in …read all…
Posted on 17 April 2024 by ScegliAuto

Car stereo (2) Battery (2) Key (4) Timing belt (1) -board computer (2) Checks and maintenance (9) Gearshift gaiter (1) Brake discs (1) Tail light (2) Fog lights (1) Cabin air filter (3) Reverse gear switch (1) Light bulb (1) Headlight bulb (2) Rear light bulb (2) Engine (1) Window motor (1) Starter motor (1) Gear oil (1) Engine oil (2) Door (1) Instrument cluster (2) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (10) Outside rearview mirror (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos