Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Citroen C4

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Battery

See other generations:
Video tutorial

Today we will explain how to replace the battery of the Citroen C4 model 1. The first step to be carried out is to open the front hood and unlock the resonator, pushing back the support tab. The second step to be carried out is to remove the air intake duct.

The third step to be carried out is to lift the plastic cover to disconnect the positive terminal.

The fourth step to be carried out is to remove the battery cover, pulling it upwards. The fifth step to be carried out is to disconnect the negative terminal and remove the battery.

The sixth step to be carried out is to insert the new battery and connect the negative terminal. The seventh step is to insert the side cover of the battery and connect the positive terminal.

The eighth step to be carried out is to insert the air duct and the resonator.


Posted on 30 November 2024 by ScegliAuto


Related tutorials

How to Change the Battery in a Citroen C4 Cactus Remote
How to Change the Battery in a Citroen C4 Cactus Remote
Citroen C4 (2014-2020 / Cactus) Let's see how to change the battery in the remote of a Citroen C4 Cactus: you will only need a thin flathead screwdriver. Look at the remote from the…
How to Change the Battery of the Citroen C4 HDI
How to Change the Battery of the Citroen C4 HDI
Citroen C4 (2004-2010 / MK 1) In this video, learn how to change the battery of the Citroen C4 HDI: ensure the vehicle is off and open the bonnet. The battery is located on the ri…
How to change the battery of a Citroen C4
How to change the battery of a Citroen C4
Citroen C4 (2004-2010 / MK 1) In this video we can see how to change the starter battery of a Citroen C4: we open the hood, and to the right of the engine block we can find the ba…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos