Do it yourself
Frequently asked questions about cars and motorcycles

How to start the Citroen Xsara Picasso with an external battery

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Battery

The steps to start the battery of a Citroen Xsara Picasso using jumper cables and another vehicle are: -Turn off the engine of both vehicles and open the front hood of both vehicles; -Turn off anything that may draw power such as the radio, lights, and so on; -Connect the first red clamp to the positive terminal of the dead battery; -Connect the second red clamp to the positive terminal of the charged battery; -Connect the first black clamp to the negative terminal of the charged battery; -Connect the second black clamp to an unpainted metal part of the chassis, away from the battery; -Start the rescue vehicle and let the engine run for about 20 minutes so that the stalled car can start; -Disconnect the cables in the reverse order in which they were connected once the battery is charged; If the emergency maneuver is not successful, it is necessary to replace the battery of the stalled vehicle.

Posted on 24 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Citroen Xsara Picasso (1999-2012 / MK 1) Start by inserting the flat screwdriver tip into the slot in the middle of the key and lever it open. This will allow you to disengage and remove the…
Citroen Xsara Picasso (1999-2012 / MK 1) Replace the vehicle's power battery? Remove the power battery in a Citroen Xsara Picasso. Open the car door and lift the driver's seat; the battery i…
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the instructions to remove and replace the battery of the Citroen Xsara Picasso 2.0 HDI. First, open the bonnet of your car and start unscr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos