Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How to replace a diesel filter on Citroen Berlingo

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Diesel filter
Operation: How to replace a diesel filter on Citroen Berlingo

How to replace the diesel filter on Citroen Berlingo? Let's see in this video how to proceed with the replacement: open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift the front hood, let's put it in safety. With a socket wrench we unscrew the locking pins placed on the container (disconnect the cables and the various tubes from the filter) where the diesel filter is located. We take out the container and remove the worn filter. We replace the filter with a new one, making it adhere well in the filter holder. Finally we reassemble the container with the filter (we connect pipes and cables) and tighten the screws. We close the front hood finally.


Posted on 18 October 2023 by ScegliAuto



Diesel filter replacement on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replacing the diesel filter of a Citroen Berlingo? Let's see the disassembly of the diesel filter in the engine compartment. We raise the front hood,
Remove the diesel filter on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Do we want to remove the diesel filter on a Citroen Berlingo? Let's see how the diesel filter is removed from inside the engine compartment. We locat
Replacement of the diesel fuel filter for the Citroen Berlingo 1.6 HDI.
Citroen Berlingo (2008-2018 / MK 2) Today's guide will show us the steps that will allow us to disassemble and replace the diesel fuel filter of the Citroen Berlingo 1.6 HDI. First of a

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos