|
Do it yourself
| |||
| ||||
How to check the fluid levels on a Citroen C4 Picasso MK1
Model: Citroen C4 Picasso
MK 1
- Years 2006-2013
In this video we can see how to check the levels on a Citroen C4 Picasso MK1: we will need both coolant and windshield washer fluid, then brake fluid and engine oil. These are all operations that should be done with the engine cold. Let's start with the engine oil: we extract the oil level indicator from its sheath, clean it with a clean paper and then put it back in. We repeat the operation and check the level and top up if necessary, without ever exceeding the maximum level, from the oil tank filling cap; then we measure again. Then we check the coolant level, and fill it up to the maximum level, with fluid of the same color as the one in the tank; here too we make sure not to exceed the maximum level. Check the brake fluid level: if it is lower than normal, it means that the brake pads are worn out. Top up the fluid and make a note to check the brakes. Finally, add windshield washer fluid to the tank, also reaching the maximum level.
Posted on 17 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Citroen C4 Picasso
(2006-2013 /
MK 1)
You can replace the handbrake button on a Citroën C4 Picasso by using a tool to pry off the trim surrounding the central display on the dashboard. On…
Citroen C4 Picasso
(2006-2013 /
MK 1)
In this guide, we will discover the necessary instructions to refill the AdBlue, which is used to reduce carbon dioxide emissions, on a Citroen C4 Pi…
Citroen C4 Picasso
(2013-2022 /
MK 2)
Today, I will explain how to enable and disable the front wipers on the Citroen C4 Picasso. Start the instrument panel and pull the right lever of th…
Other guides you may be interested in
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.113
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
