|
Do it yourself
| |||
| ||||
How to change the gearbox oil of a Citroen C4 Picasso MK1
Model: Citroen C4 Picasso
MK 1
- Years 2006-2013
In this video, we will see how to change the gearbox oil of a Citroen C4 Picasso MK1: we open the front hood and lift the front part and remove the left front wheel, in order to access the drain plug; this plug is located under the left front part, but be careful not to confuse it with the engine oil plug! Unlock the plug and place a basin underneath to collect the fluid that will flow out: we will then dispose of it at an authorized center. Change the plug and gasket and when all the fluid has drained, put it back in place. The filling hole is located on the left side of the gearbox, between the front fender and the shock absorber, using an extension and a 19mm key. The filling is done very well with an oil injection syringe. The right amount is reached when some oil comes out of the top-up plug, then put the plug back in place and clean the area well with a brake cleaner. Reassemble the wheel, the operation is complete.
Posted on 26 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Citroen C4 Picasso
(2013-2022 /
MK 2)
This video shows how to remove and replace the gearbox oil on the second generation Citroen C4 Grand Picasso, following these simple steps. First, li…
Citroen C4 Picasso
(2006-2013 /
MK 1)
Today we will see the instructions that will allow us to reprogram the control unit of the automatic gearbox of the Citroen C4 Picasso. In order to p…
Citroen C4 Picasso
(2006-2013 /
MK 1)
Today we will explain how to replace the engine oil and oil filter on the Citroen C4 Picasso. We open the hood of the vehicle and remove the oil tank…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.151
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |