Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the automatic gearbox of the Citroën C1?

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Transmission

See other generations:
Video tutorial

In order to reset the automatic gearbox of the Citroën C1, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on the dashboard immediately below the steering column. Once the scanner is connected, you will need to select the model of the car and its corresponding version: this will allow you to follow the instructions in the tutorial to reset the automatic gearbox to its initial settings.

Then you can disconnect the scanner and verify that everything is working properly.


Posted on 1 March 2025 by ScegliAuto


Related tutorials

Citroën C1: Clutch Replacement in the Workshop
Citroën C1: Clutch Replacement in the Workshop
Citroen C1 (2005-2014 / MK 1) The video documents the clutch replacement on a Citroën C1 in the workshop. With the bonnet open, the engine bay is shown as the operator clears the …
How to Replace the Clutch on a Citroen C1 1.0
How to Replace the Clutch on a Citroen C1 1.0
Citroen C1 (2005-2014 / MK 1) Today, we will go through the procedure to remove and replace the clutch discs on a Citroen C1 1.0 petrol. First, lift the vehicle and remove the fro…
How to Adjust the Clutch Pedal on a Citroen C1?
How to Adjust the Clutch Pedal on a Citroen C1?
Citroen C1 (2005-2014 / MK 1) In this tutorial, you will learn how to adjust the clutch pedal on a Citroen C1, a very simple and quick operation, for example, when the clutch is w…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos