Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove a headlight on Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Headlight

Let's see how to remove a headlight on Citroen C4: open the engine hood by pulling the hood opening lever and put it in safety. We unscrew the locking pins on the headlight bar with a socket wrench or cordless screwdriver. At this point we will find other pins in the lower part of the lighthouse, let's unscrew them from the metal plates. We detach the lamp holders from the headlight and extract the same from the car body. We assemble the new headlight with the new bulbs if damaged and (always suitable type and size) we insert the headlight in its housing. Finally we tighten the pins of the lighthouse with the socket wrench. We test the correct functioning of the lights.

Posted on 17 July 2019 by ScegliAuto

Video tutorial

Related tutorials

Headlight replacement on Citroen C4
Headlight replacement on Citroen C4
Citroen C4 (2010-2018 / MK 2) Does the Citroen c4 headlight need to be changed? Let's see how it disassembles. Before disassembling the headlight we must disconnect the power supp…
How to replace the headlight bulb on the Citroà «n C4?
How to replace the headlight bulb on the Citroà «n C4?
Citroen C4 (2010-2018 / MK 2) The replacement of the Citroà «n C4 headlight bulb is done by opening the hood, so that the inside of the corresponding headlight can be accessed. He…
Citroen C4 headlight bulb replacement
Citroen C4 headlight bulb replacement
Citroen C4 (2004-2010 / MK 1) Replacement of damaged bulbs mounted in the headlight of a Citroen C4. Let's open the front hood, let's put it in safety. We disassemble the plastic …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos