|
Do it yourself
| |||
| ||||
How to remove the rear bumper of the Citroen C4 Picasso
Model: Citroen C4 Picasso
MK 1
- Years 2006-2013
Let's see how to remove the rear bumper of the Citroen C4 Picasso: to do this, we will also have to remove the rear lights, and once these are removed, we will find two screws on each side of the lights, which we will not see unless we remove the optical group. We will also have to remove the rear wheel arches, removing the screws from inside the wheel arch itself, and in the lower part of the bumper, in order to remove the lining. Once this is done, we can see that inside the bumper, we find a torsion screw that we must remove, then we will have to disconnect an electrical plug; we will repeat everything on the other side and then under the bumper there is a support tab from which to remove a screw. Now we can start to detach the bumper, being careful not to break the clips that connect the bumper to the bodywork: we must therefore use decision, but also a lot of delicacy. It is advisable to use a plastic tool.
Posted on 17 April 2025 by ScegliAuto
Video tutorial
Related tutorials
Citroen C4 Picasso
(2013-2022 /
MK 2)
In order to remove the front bumper of the Citroën C4 Picasso, you need to remove all the rivets and screws that secure the piece to its housing: the…
Citroen C4 Picasso
(2013-2022 /
MK 2)
Follow these steps to remove the front bumper of a Citroen C4 Picasso. Lift the bonnet and secure it. Using a battery-powered screwdriver or a screwd…
Citroen C4 Picasso
(2013-2022 /
MK 2)
In this tutorial, you will see how to remove the rear bumper on the Citroen C4 Picasso, a very simple and quick operation. First, go to one of the wh…
Other guides you may be interested in
|
How to Open the Bonnet on the Lancia Y
To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.521
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |